Articles PDF eBook ArticlesPDF.com

Engine test report Born CLS Bond Oil Additive VOLVO-PENTA MD-1. Engine test report Born CLS Bond™ Oil Additive VOLVO-PENTA MD-1Introduction During the spring of 2001, there were tests conducted with 2-stroke oil blended with an additive based on Advanced Lubrication Technology, Inc.’s Boron CLS Bond™ . The test bench setup was a Husqvarna chainsaw engine HVA 346. The purpose of the test was to study the claimed low friction performance of the product. The tests were conducted in a test bench at the research laboratory in Sweden. The product The oil additive was delivered by Samvina AB and mixed at a ratio of 100:1 with HVA-blend fuel (RON 92) Initial run and base performance was performed with Husqvarna 2T-LS oil mixed with a ration of 50:1 using HVA- blend fuel

The engine was run for 2 hours with HVA-LS 2-stroke oil following a performance test with temperature logging. The tests were done at full throttle over 6,000-10,000 rpm, and for different A/F at constant 8,400 rpm. In the following stage, the engine was treated with Boron CLS Bond™ . The method was 15 hours running with a constant load on a bench test with a rich air/fuel mix at 7,200 rpm. The procedure was repeated over three days, for 5 hours /day [Download]